{"title":"Spray Coatings","description":null,"products":[{"product_id":"new-overcoat-ceramic","title":"OVERCOAT CERAMIC","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOVER COAT CERAMIC\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eSolvent-based hardening ceramic spray coating\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConcept\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe OVER COAT series has long been our core line of sacrificial-layer, water-based emulsion ceramic coatings. For this product, we took a different approach: a \"hardening\" solvent-based ceramic coating. It was developed over one to two years, with sample feedback from customers and repeated comparison testing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBuilt with reset in mind\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMany hardening coatings bond strongly because of solvents, and that same strength can make them hard to remove. We aimed to keep that level of performance while making it easy to reset. We kept solvents and adhesion primers to a minimum, so the coating can be maintained and reset with KMKZ PAINT CLEANSING and KMKZ AMAZING GLAZE, which is our basic approach to anti-aging maintenance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt also pairs well with KMKZ ACID SHAMPOO 1.1. Depending on how dirty the car is and where it is driven, dirt can often be broken down with very little contact.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis product contains nonane and some other solvent, but not in amounts meant to dissolve the paint surface. A small amount acts as a binder for the modified fluorinated polysilazane.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eModified fluorinated polysilazane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMany users will notice the slickness first. It comes from a generous amount of the same modified fluorinated polysilazane used in STANCE RIM COAT 4.0. This material resists alkaline and acidic chemicals, and it took more than six months of development and testing to bring out its strengths.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCarbon nanotubes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt also contains carbon nanotubes, which help reduce static charge and support adhesion to the paint. Our impression is that dirt is less likely to stick and is easier to wash off.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e120 ml volume\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMany hardening spray coatings can harden or gel inside the bottle when the volume is large. So we used a concentrated formula with carefully selected materials and a smaller volume. Estimated use is 30 ml to 40 ml per car. It can also be used on black plastic trim, plastic and wheels.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRecommended for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThose who want something harder to apply than a simple coating but easier than a full hardening coating\u003c\/li\u003e\n\u003cli\u003eThose who can't wash often and want durable protection\u003c\/li\u003e\n\u003cli\u003eThose who prefer simple washing with an acidic shampoo\u003c\/li\u003e\n\u003cli\u003eThose who want a texture different from past KAMIKAZE products\u003c\/li\u003e\n\u003cli\u003eThose who want to experience the dirt resistance of carbon nanotubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eA different kind of KAMIKAZE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is a spray-type hardening solvent coating, made after studying other products. Past OVER COAT products were made with subtle nuances for experienced users. This one has more easily noticeable performance, which is not typical of us. Our CEO expects opinions to be divided. We released it because we want to keep two things at the core of our products: easy reset (stripping) and easy maintenance (stain management).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNotes on the finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss:\u003c\/strong\u003e Closer to ISM COAT 3.0 than to the MIYABI COAT series, with a rich, glossy look. The hard luster typical of KAMIKAZE is weaker, and it does not show polished bare paint as is. Opinions among our users differ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater repellency:\u003c\/strong\u003e Comes from the modified fluorinated polysilazane film, with fine density and small water beads. It differs from ISM COAT 3.0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlickness:\u003c\/strong\u003e Try it on paint prepared by polishing or with a base treatment such as KMKZ AMAZING GLAZE. It has a slickness that feels unusual for KAMIKAZE, and it comes from the material itself, not from an added slip agent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication and curing:\u003c\/strong\u003e Application is easy, but the film starts hardening right away. After 3 to 6 hours, you can see or feel a thick film. Initial cure is 12 hours, though in summer it can be shorter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePrep tip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhen applying after KMKZ AMAZING GLAZE, a light degrease often helps bonding, especially on soft, low-density paint, and depending on paint type. The hard resin on the surface of AMAZING GLAZE may be close in molecular size to this product, which can make bonding harder. As a guide, use a prep product, or a mix of 70% water and 30% alcohol with less than one drop of dish soap. This is a recommendation and a guide only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCautions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eKeep it dry for the first 12 hours: no rain or moisture. It fully cures in 72 hours.\u003c\/li\u003e\n\u003cli\u003eAfter full cure, waxes and sealants may bead off and bond poorly.\u003c\/li\u003e\n\u003cli\u003eAfter full cure, removal with KMKZ PAINT CLEANSING or KMKZ AMAZING GLAZE may be harder than usual. Adding steps can remove it.\u003c\/li\u003e\n\u003cli\u003eContains solvents. Always wear a mask and gloves.\u003c\/li\u003e\n\u003cli\u003eAfter use, store with the cap on, not the spray head.\u003c\/li\u003e\n\u003cli\u003eUsed spray heads may harden and become unusable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePRODUCT INFO\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIngredients:\u003c\/strong\u003e Special silicone resin, modified fluorinated polysilazane, siloxane, fluorine additive, inorganic solvent, dibutyl ether, carbon nanotubes, special additives\u003cbr\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 120 ml (about 3 to 4 standard-sized cars)\u003cbr\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 spray heads\u003cbr\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Japan\u003c\/p\u003e","brand":"Kamikaze Collection","offers":[{"title":"Default Title","offer_id":44711177945323,"sku":"overcoatceramic","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/1560\/2667\/files\/kmkz155187.jpg?v=1789022927"},{"product_id":"the-delegance-coat-ver3","title":"THE d'ELEGANCE COAT ver3","description":"\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTHE d'ELEGANCE COAT ver3\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eTHE d'ELEGANCE DETAILING by KAI MORITA, Private Label\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eKIKUSUI LABEL - THE d'ELEGANCE SERIES is a special brand series created by our founder, KAI MORITA, under his private label. It is built around the specialty of KAMIKAZE COLLECTION: creating a show-stopping car, spending time and effort without holding back, with the aim of winning awards at Concours d'Elegance events.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe third-generation THE d'ELEGANCE COAT was developed under a different concept and theory from the KAMIKAZE COLLECTION OVER COAT series.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt is a water-based carnauba wax coating that contains the wax ingredients found in THE d'ELEGANCE WAX, made to keep that beauty at its best\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt gives a clear, glossy finish, with the feel and water repellency of a freshly waxed surface.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePRODUCT INFO\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIngredients:\u003c\/strong\u003e Water-soluble carnauba, special silicone, surfactant, fragrance, water, borophene, boron nitride\u003cbr\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 300 ml\u003cbr\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Japan\u003c\/p\u003e","brand":"Kamikaze Collection","offers":[{"title":"Default Title","offer_id":46630380699883,"sku":"delecoat3","price":98.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/1560\/2667\/files\/delecoat.jpg?v=1753363333"},{"product_id":"over-coat-ceramic-evo","title":"OVER COAT CERAMIC -EVO-","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/rir199Ir4Cc\" width=\"400\" height=\"800\" autoplay=\"autoplay\" loop=\"loop\" origin=\"\" rel=\"1\" start=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOVER COAT CERAMIC -EVO-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTHEORY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eModified fluorinated polysilazane + borophene\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis formula combines our modified fluorinated polysilazane, for chemical resistance, with borophene (a single-atom layer of boron), added to help the film bond to the paint.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor overseas markets, including Europe and the United States, we reduced the organic solvents such as nonane used in the earlier OVER COAT CERAMIC as far as possible, and moved from a solvent-based formula to a water-soluble one (water, water-soluble solvent, additives, main ingredients and borophene).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe product grew out of our development of a cold-climate coating for Northern Europe. While working on that project with modified fluorinated polysilazane, borophene and several additives, we saw a chance to bring the same approach to OVER COAT CERAMIC, and changed the direction of development. The formula was created by blending our own materials with samples prepared by our joint development partner.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDeveloped with the KAIZEN (continuous improvement) approach that KAMIKAZE COLLECTION specializes in, this next-generation product reflects a new spirit of challenge and a system for bringing in new technologies and materials. A cold-climate version is available as OVER COAT LIQUID 6.1.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWe offer it as a new phase of KAMIKAZE COLLECTION and OVER COAT.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eLooking for the previous formula? See OVER COAT CERAMIC.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCompared with the earlier OVER COAT CERAMIC, gloss and slickness are greatly improved. In exchange, it is less forgiving to apply and requires a somewhat demanding application environment and technique.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Greatly improved resistance to alkaline products and solvents. Resistance to some acidic chemicals has been confirmed under set conditions. Most reported issues have come from application problems, such as cure time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral spots:\u003c\/strong\u003e WATER SPOT REMOVER, diluted with 50% water, can still remove mineral deposits. For regular maintenance, KMKZ ACID SHAMPOO and KMKZ QUICK DETAILER 3.0 are generally sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval:\u003c\/strong\u003e It takes more time and effort than usual, but it can be removed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eA NOTE FROM OUR CEO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTiming arrives suddenly, and I believe this edgy product was born from a mix of chance and the right moment.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eI buy and test products from around the world on business trips, and I receive samples from overseas development teams. I had always been skeptical of durable spray-on hardening ceramic coatings that rely on strong or highly penetrating solvents, with strong cross-linking and a tendency toward mille-feuille layering. Just as I was thinking about approaching the strictly regulated Western market again, this product came along.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAs CEO, I was looking for a product with a stronger personality. So even at some cost to ease of application, I set out to make something KMKZ had never made before, and spent several months developing it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur products have always put resistance to acidic chemicals first. This one also greatly strengthens resistance to alkalis and solvents, forming a film that is hard to strip. As a by-product, it has a slickness unlike anything we've made before. Honestly, it came out better than I expected.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWe added \"EVO,\" for evolution, to the name because there is no success without failure, which is the all-in spirit of KAMIKAZE. We wanted to share this as a new side of KMKZ development. That is why we didn't call it \"OVER COAT CERAMIC 2.0.\"\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 150 ml bottle gives you room to get the application right.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt is true that this product is almost the opposite of KMKZ's usual philosophy (wry smile). I'm looking forward to seeing how it is received in Japan and overseas. I think opinions will be divided (laughs).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eKMKZ CEO\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eP.S.\u003c\/strong\u003e KMKZ PRIMER DEGREASING was developed alongside this product. It's just a degreaser, but as users in Japan and overseas have found, differences in water contact angle and water behavior can appear within a few weeks. It pairs very well with this coating.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDIRECTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eDo not apply below 15°C (59°F). For colder conditions, see OVER COAT LIQUID 6.1.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis product assumes paint that has already been washed and polished. For paint in poor condition, prepare first by removing water spots and iron fallout and polishing. We recommend KMKZ PAINT CLEANSING or KMKZ AMAZING GLAZE, and always degrease with KMKZ PRIMER DEGREASING.\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003ePrepare the surface, then let it dry and degrease. The surface must be completely free of moisture.\u003c\/li\u003e\n\u003cli\u003eSpray an appropriate amount onto an applicator sponge. \u003cem\u003eTake care to avoid overspray. With the dropper, drip it out in an \"X\" pattern.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eWork one panel at a time (one door, one fender, or half a hood).\u003c\/li\u003e\n\u003cli\u003eSpread quickly from the center of the panel, using horizontal strokes.\u003c\/li\u003e\n\u003cli\u003eTo even out the application, go over it with vertical strokes. \u003cem\u003eToo many back-and-forth strokes will thin the film.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuff off with both sides of a dry microfiber towel.\u003c\/li\u003e\n\u003cli\u003eIf streaks appear, they can be removed with KMKZ AMAZING GLAZE.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication conditions\u003c\/strong\u003e\u003cbr\u003eThis product forms a tough film but can be delicate to apply. Please note:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 15°C (59°F) or above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial cure:\u003c\/strong\u003e 12 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e 72 hours (washable after this)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoating:\u003c\/strong\u003e After 24 hours. We recommend two coats.\u003c\/li\u003e\n\u003cli\u003eWarming the paint in sunlight after application can speed up curing.\u003c\/li\u003e\n\u003cli\u003eSpraying directly onto the body can leave product on paint, glass and other surfaces. Spraying onto the applicator is better. A dropper uses less product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDETAILING COSMETIC APPLICATOR:\u003c\/strong\u003e Well suited to an even, thicker film. The surface is small, so it takes practice to work quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eStandard sponge applicators tend to use more product and give an uneven film thickness, so add product in moderation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eApply a generous amount.\u003c\/li\u003e\n\u003cli\u003eUse at least two sides of the applicator per car. As the microfiber fibers semi-cure, they dissolve into fresh product and spread it into an uneven layer, which makes application much harder. Switch to a new applicator, or a fresh side, at the halfway point of the car.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. Can I reset it with KMKZ AMAZING GLAZE or KMKZ PAINT CLEANSING?\u003c\/strong\u003e\u003cbr\u003eA. Yes, but removal takes more time and effort than usual.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. What if the temperature is below 15°C (59°F)?\u003c\/strong\u003e\u003cbr\u003eA. Do not apply it. For colder conditions, see OVER COAT LIQUID 6.1.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. After 72 hours I can see a film, but water repellency is weak or chemical resistance is lacking.\u003c\/strong\u003e\u003cbr\u003eA. This is most likely due to temperature or moisture contact during application. We recommend reapplying.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. How many applications does one 150 ml bottle cover?\u003c\/strong\u003e\u003cbr\u003eA. About 4 to 5 standard-sized cars. Apply a sufficient, even amount, since a thinly spread film can lead to poor results.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. What do you recommend for applying it?\u003c\/strong\u003e\u003cbr\u003eA. Degrease before application, use an applicator that lets you apply evenly and generously, and use four microfiber towels for efficient wiping: KMKZ PRIMER DEGREASING, DETAILING COSMETIC APPLICATOR, and THE d'ELEGANCE TOWEL.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. I noticed haze and uneven application that wouldn't wipe away.\u003c\/strong\u003e\u003cbr\u003eA. A small amount of KMKZ AMAZING GLAZE can remove the haze, but we generally recommend reapplying. Before reapplying, degrease with KMKZ PRIMER DEGREASING.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. Can I apply it without resetting?\u003c\/strong\u003e\u003cbr\u003eA. This product forms a very delicate bond and is unlikely to bond to coatings other than our MIYABI COAT. In every case, degreasing with KMKZ PRIMER DEGREASING is essential.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePRODUCT INFO\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIngredients:\u003c\/strong\u003e Hexyldecanol, dimethylsiloxane-inorganic polysilazane, modified fluorinated polysilazane, tetradecyl hexacosanoate, borophene, purified water\u003cbr\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 150 ml\u003cbr\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Japan\u003c\/p\u003e","brand":"Kamikaze Collection","offers":[{"title":"Default Title","offer_id":47113986113771,"sku":null,"price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/1560\/2667\/files\/2_04e37404-dc4c-41e7-a2f4-6ca2312b2ab0.jpg?v=1791164385"},{"product_id":"over-coat-liquid-6-1","title":"OVER COAT LIQUID 6.1","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOVER COAT LIQUID 6.1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTHEORY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eThe next step after VIKING COAT LIQUID 5.4: durable protection for the cold season.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe lineage: LIQUID 5.3 → LIQUID 5.4 (the limited-edition VIKING COAT) → LIQUID 6.1. LIQUID 6.1 adds modified fluorinated polysilazane, borophene and titanium to the 5.3 base.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis project began when our Norwegian distributor asked for an exclusive, highly durable ceramic protection for cold climates in Scandinavia.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWe have been developing a product for northern regions, on and off, since 2024. In cold weather, water-repellent groups tend to close up, so water repellency doesn't work as it should, and slickness is virtually nonexistent. Our top priority was a surface coating that lasts more than one winter.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor LIQUID 6.1, we deliberately adopted the 5.3 base and aimed for high durability by leaving out slickness. We increased the surfactant for adhesion to the paint surface and put protection first. All changes were made while prioritizing durability and keeping application possible in cold climates.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe result was the emulsion-type VIKING COAT, LIQUID 5.4. After further material testing, we added titanium, adjusted concentrations, and introduced the latest ION GENERATOR 3.0, which led to LIQUID 6.1.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VIKING COAT technology was first carried over into OVER COAT CERAMIC -EVO-, a spray coating with a water-soluble solvent system, high durability and strong solvent resistance. LIQUID 6.1 is a \"hybrid\" that brings the water-soluble solvent of CERAMIC EVO into the LIQUID 5.3 base emulsion.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt uses our modified fluorinated polysilazane for chemical resistance, plus borophene (a single-atom layer of boron) to help the film bond to the paint. We also reduced organic solvents such as nonane, which were used in the earlier OVER COAT CERAMIC, as far as possible, and moved to a water-based formula.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWe offer it as a new phase of KAMIKAZE COLLECTION and OVER COAT.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLIQUID 6.1 is a performance-focused model built around durability and chemical resistance. It has no slick feel and tends toward a reflective sheen rather than depth. The formula and finish are intentionally uncompromising, aimed at international and Nordic conditions.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Greatly improved resistance to alkaline products and solvents compared with LIQUID 5.3, with particular attention to road salt and alkali resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast surface cure:\u003c\/strong\u003e The surface cures in about 3 hours after application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSacrificial layer:\u003c\/strong\u003e It can be used as a sacrificial layer over curing ceramic coatings, or as protection before they cure. It can be applied over OVER COAT CERAMIC -EVO- as a sacrificial layer until that coating fully cures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral spots:\u003c\/strong\u003e WATER SPOT REMOVER, diluted with 50% water, can still remove mineral deposits. For regular maintenance, KMKZ ACID SHAMPOO and KMKZ QUICK DETAILER 3.0 are generally sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset:\u003c\/strong\u003e Remove it as usual with KMKZ AMAZING GLAZE or KMKZ PAINT CLEANSING.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eION GENERATOR 3.0\u003c\/strong\u003e\u003cbr\u003eThis model uses the latest version of the ION GENERATOR, a signature feature of the OVER COAT LIQUID series. Earlier models make the emulsion slightly alkaline, while this one is slightly acidic.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt is a key material for optimizing the ionic balance of the water-based emulsion. It adds negative ions to the silicone molecules themselves and supports the minimal surfactant. Its mild acidity helps application and removes inorganic mineral deposits, which helps prevent unevenness without organic solvents. We believe this \"ion control\" is what gives the product its resistance to re-soiling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKMKZ NEW SPRAYER\u003c\/strong\u003e\u003cbr\u003eIn response to customer feedback, we developed a new large-capacity sprayer in black and gold to match our spray heads, with several custom-made parts. Durability was the priority.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eA NOTE FROM OUR CEO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is the successor to the popular, highly acclaimed limited-edition VIKING COAT 5.4, refined further.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eI've received many inquiries about OVER COAT CERAMIC -EVO-, so I hope you'll try this as a sacrificial layer until it cures, and for outdoor application in colder temperatures.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eKMKZ CEO\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDIRECTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eDesigned for cold-season use. Apply at 5°C (41°F) or above.\u003c\/em\u003e\u003c\/p\u003e\n\u003col dir=\"ltr\"\u003e\n\u003cli\u003eDegrease the surface with KMKZ PRIMER DEGREASING. We also recommend KMKZ AMAZING GLAZE to fill fine scratches and create a smooth base, and KMKZ PAINT CLEANSING to remove degraded wax or coating.\u003c\/li\u003e\n\u003cli\u003eApply a generous, even amount with an applicator, one panel at a time. Spraying onto the applicator is better than spraying directly onto the body, which can leave product on paint, glass and other surfaces. Using a dropper uses less product.\u003c\/li\u003e\n\u003cli\u003eWipe off with a clean microfiber towel.\u003c\/li\u003e\n\u003cli\u003eKeep the car away from rain and water for 3 hours after application.\u003c\/li\u003e\n\u003cli\u003eRecoat after at least 12 hours. We recommend two coats; spread the second coat thinly.\u003c\/li\u003e\n\u003cli\u003eFor long-lasting maintenance, we recommend KMKZ QUICK DETAILER 3.0.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication conditions\u003c\/strong\u003e\u003cbr\u003eThis product forms a tough coating but can be delicate to apply. Please note:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial cure:\u003c\/strong\u003e 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e 10 hours (washable after this)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 5°C (41°F) or above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather:\u003c\/strong\u003e Watch for low temperatures and moisture such as frost.\u003c\/li\u003e\n\u003cli\u003eExposure to strong sunlight after application can speed up curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. Can I reset it with KMKZ AMAZING GLAZE or KMKZ PAINT CLEANSING?\u003c\/strong\u003e\u003cbr\u003eA. Yes. You can reset it just as easily as other OVER COAT products.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. How is it different from OVER COAT CERAMIC -EVO-?\u003c\/strong\u003e\u003cbr\u003eA. LIQUID 6.1 forms a film using some of the film-forming ingredients found in CERAMIC EVO. As an emulsion (a milky mixture of water and silicone), it is highly resistant to alkaline and acidic cleaners, and it is as easy to apply as the rest of the LIQUID series. However, its durability and protection do not match CERAMIC EVO, which remains our ideal protection. We recommend LIQUID 6.1 as a sacrificial layer during the initial drying stage of CERAMIC EVO, when conditions are hard to control.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. After 12 hours I can see a film on the paint, but water repellency is weak or chemical resistance is lacking.\u003c\/strong\u003e\u003cbr\u003eA. This is likely due to temperature or moisture contact during application, or to a degraded, mille-feuille-like layer underneath that needs a reset. Prepare the surface again and reapply.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. How many applications does one 300 ml bottle cover?\u003c\/strong\u003e\u003cbr\u003eA. More than 10 standard-sized cars. For the first coat, apply a sufficient, even amount, since a thin coat can lead to poor results. From the second coat, a thin layer is enough.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. What do you recommend for applying it?\u003c\/strong\u003e\u003cbr\u003eA. Degrease before application, use an applicator that lets you apply evenly and generously, and use four microfiber towels for efficient wiping.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. I noticed haze and uneven application that wouldn't wipe away.\u003c\/strong\u003e\u003cbr\u003eA. A small amount of KMKZ AMAZING GLAZE can remove the haze, but we generally recommend reapplying. Before reapplying, degrease with KMKZ PRIMER DEGREASING.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. Can I apply it without resetting?\u003c\/strong\u003e\u003cbr\u003eA. We recommend preparing the surface with KMKZ AMAZING GLAZE. In every case, degrease with KMKZ PRIMER DEGREASING.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ. Can I use it on glass, black plastic trim or wheels?\u003c\/strong\u003e\u003cbr\u003eA. It isn't formulated for those surfaces, so we don't recommend it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePRODUCT INFO\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIngredients:\u003c\/strong\u003e Special silicone resin, organic polysilazane, ionic surfactant, silica water, fragrance, borophene, titanium dioxide, nanomaterials\u003cbr\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 300 ml\u003cbr\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Japan\u003cbr\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Keep out of reach of children. Avoid contact with eyes. Test on an inconspicuous area first.\u003c\/p\u003e","brand":"Kamikaze Collection","offers":[{"title":"Default Title","offer_id":47360705659115,"sku":"overcoatliquid6.1","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/1560\/2667\/files\/OVERCOATLIQUID6.1.jpg?v=1791164509"}],"url":"https:\/\/kamikaze-collection.store\/collections\/spray-coatings.oembed","provider":"Kamikaze Collection","version":"1.0","type":"link"}